Fast Clock Order Form
| Description | Price |
Quantity |
Total |
|---|
Regulator fast clock. Hand-finished oak case. Includes assembled and tested controller in styrene case, connecting cable to clock, AC power adaptor, complete instructions. Currently not available.
Specify desired clock speed (easily changed) : 1 |
$335.00 | | |
Wall-hung fast clock. Round or octagonal wooden rim. Includes assembled and tested controller in styrene case, connecting cable to clock, AC power adaptor, complete instructions. Currently not available.
Specify desired clock speed (easily changed) : 1 |
$195.00 | | |
Small clock enclosure. Custom-printed with your railroad's name. Comes with one set of small clock hands. Contact me first (mike at mdodd dot com) to discuss custom lettering and options.
Currently not available.
Option A - Printed black bezel with "gold"-trimmed round hole.
Option B - Ears for rear mounting through fascia.
Option C - Upgraded finish.
|
$25.00
$9.00
$5.00
$8.00
| | |
| |
|
|
|
Fast clock controller, complete. Assembled and tested;
housed in styrene case with switches. Includes AC power adaptor. Currently not available.
Specify desired clock speed (easily changed) : 1 | $155.00 | | |
| Fast clock controller PCB, kit. Includes PC board and all electronic
parts. Switches, case, power supply not included. |
$45.00 | | |
| Fast clock controller PCB, assembled. Same as above except that controller PC board is completely assembled and tested. Currently not available. | $75.00 | | |
| Fast clock controller PCB, bare-bones kit. Includes PC board and microprocessor only. |
$27.00 | | |
| |
|
|
|
Only USA-made Quartex Q80 movements work with the fast clock controller. You may order movements from me or from Klockit, but read this before ordering from Klockit.
| | | |
Q-80 clock movement kit. Includes one unmodified Klockit Q-80 movement, resistor, wire, and instructions to modify it. Also comes with two sets of hands, Klockit no. 66936 for 5½" diameter dials, and Klockit no. 66927 for 7" dials.
| $7.50 | | |
Q-80 clock movement, modified. Includes one modified and tested Klockit Q-80 movement and two sets of hands, Klockit #66936 for 5½" diameter dials, and Klockit #66927 for 7" dials. Currently not available.
| $20.00 | | |
Important! Measure the thickness of the dial on your clock, and indicate it here (the movement shaft is longer to allow for mounting hardware). If ordering multiple movements for different thickness dials, write the number of movements desired for each thickness.
Dial thickness:
[ ] 1/8"
[ ] 3/16"
[ ] 1/4"
[ ] 3/8"
[ ] 3/4"
| | | |
Clock hands
Clock movements come with two sets of hands, no. 66936 for 5-1/2" diameter dials, and no. 66927 for 7" dials. To substitute no. 66979 or no. 66990 short hands, cross out the hands you don't want and mark the hands you do want.
[ X ] 66936
[ X ] 66927
[ ] 66979
[ ] 66990
|
| | |
|
If ordering only movements, please add $3.00 shipping per order. No charge for shipping if movements are ordered with a fast clock controller or a clock.
| $3.00 | | |